FREE VERSION PRESS TO CALCULATE:-
Pro Version $25 AUD. (If already registered, click to open program)
The calculators
Will work on mobile phones, Computers and offline.
The programs can calculate the tube size for any job with only a few clicks.
The input requirements are the start pressure, the pipe length, the number of dwellings, and
the difference in elevation from the start to the end of the pipe run.
However the free version is limited to pipe sizes up to 50mm.
Fractional dwellings can also be entered, allowing the entry of loading units if desired.
A Dwelling is taken as roughly equivalent to 2 Bathrooms, a kitchen and a laundry.
The Proversion allows the opportunity to:-
- Count any combination of the actual fixtures, known flows, and Loading Units.
-
Change the allowable maximum velocity.
- Change the desired residual head.
- Tube diameters up to 200mm
- Calculate pump duty, if a pump is required.
- Has a table of Loading Units.
- Generates a table of all pipe capacities for the input parameters.